BUILT ON OPEN STANDARDS

IWA Water Balance WHO Quality Guidelines EN 50160 Voltage IEEE SAIDI/SAIFI IEC 61968 / OPC-UA

THE PROBLEM

Your data exists. Your visibility doesn't.

Every utility has sensors. Most utilities still can't answer basic questions without calling someone. KonduitData closes that gap.

Three screens, one answer

SCADA for pressure. Another vendor for quality. A spreadsheet for the rest. You shouldn't need to cross-reference three systems to understand one DMA.

Alerts that arrive too late

By the time someone notices a pressure anomaly on a legacy SCADA screen, the burst has already flooded the street. Continuous evaluation against your own thresholds changes that.

Reports that are always a month old

NRW calculations done manually on last quarter's data. Compliance reports compiled from exported CSVs. Your network moves in seconds — your reporting should too.

WHAT KONDUITDATA DOES

One screen. Both networks. Every sensor.

See everything, live

Pressure, flow, voltage, chlorine, tank levels, pump status — from every vendor, normalized into one schema. No blind spots between SCADA refreshes.

Get alerted on your terms

Set thresholds per zone, per device, per measurement. When chlorine drops below 0.2 mg/L in Zone-3 at night, you know within seconds — not the next morning.

Dispatch and track

Alert fires → ticket created → field crew dispatched with full context: which device, what reading, how long it's been out of range. Close the loop with an audit trail.

TWO NETWORKS, ONE PLATFORM

Built for the way multi-utilities actually operate

Water Distribution

Track the IWA water balance you already know — but automated, per DMA, in real time. Monitor MNF between 2–4 AM without spreadsheets. Keep chlorine, turbidity, and pH within WHO limits with continuous alerts.

✓ IWA-standard NRW tracking per DMA
✓ Pump station energy and performance KPIs
✓ Reservoir and tank level monitoring with overflow/dry-run alerts

See Water Capabilities →

Electricity Grid Operations

Monitor substation loading and voltage levels across your distribution network. Track EN 50160 compliance continuously. Detect overloaded feeders before they cascade into outages.

✓ Smart meter fleet health and staleness monitoring
✓ Feeder zone load analysis and topology routing
✓ SAIDI/SAIFI reliability tracking per feeder zone

See Electricity Capabilities →

WHY WE BUILT THIS

We got tired of explaining the same problem to software vendors who'd never been inside a pump station.

We've managed rural water networks where a single pressure drop meant a village without water for 8 hours. We've run electricity grids where three different SCADA vendors meant three different truths about the same substation.

KonduitData exists because nothing on the market actually worked the way we needed it to. The data was always there — it was just trapped in silos, vendor-locked, and impossible to act on in real time.

We're a startup. We don't have 50 logos to display. What we have is a platform we'd actually use ourselves — because we built it to solve our own problems first.

Read Our Story →

Stop switching between three SCADA screens to find one answer.